Battery Charger CM 1224 Dual Output 12 24VDC 5A 1P - 12 MONTH WARRANTY
GUARANTEED YOU ARE SATISFIED 100%
WARRANTY for 12 MONTHS
If Damaged / Not Working then our Battery Charger Replace New
(Not in Repair, but we REPLACE NEW CHARGER BATTERY)
The Warranty Does Not Apply, if:
- Incorrect installation
- Burned Components
- Lightning Induction
Battery charger for generator (charge battery generator). This charger is generally installed in AMF panels, ATS and local generator panels. This charger can also be used to charge batteries for cars, motorcycles, forklifts and other heavy equipment.
The way this battery charger works is if the input voltage is connected to a 220VAC voltage source the battery charger will output 12VDC or 24VDC (There is a selector to determine the 12VDC / 24VDC output voltage). And will issue a maximum current of 5 Amperes which will charge batteries.
To maximize the charge, there is a trimpot to adjust the DC voltage output contained in this PCB charger. The bigger the DC Output is issued, the greater the output ampere issued. (Recommended voltage settings for 12VDC batteries are 13.8VDC max. And for 24VDC batteries is 28.5VDC max).
For setting the output voltage by rotating slowly (soft turning) trimpot found on the PCB.
The advantages of this charger are:
1. Maintain batteries in full charge conditions automatically and safely
2. Helps to extend the life of batteries
3. Complete protection against reverse polarity (If when connected to the Polarity Plus and minus batteries is reversed the charger remains safe)
4. In this charger there is a fuse if there is a Short circuit and over charge, the charger will remain safe