Sumber Berkat Abadi - Jual WOODWARD dan Battery Charger BAE
sql

AUTOMATIC START UNIT 701-AS MANUAL START 701K-AS CONTROL MODULE 701KAS 701 K AS

Rp. 1,450,000
Last Updated
30 Jun 2022
Country Origin
China
Minimum Order
1 unit
Category
Our Product

Specification of AUTOMATIC START UNIT 701-AS MANUAL START 701K-AS CONTROL MODULE 701KAS 701 K AS

AUTOMATIC START UNIT 701-AS MANUAL START 701K-AS CONTROL MODULE 701KAS 701 K AS

The 701 is available in Manual and Auto Start versions, offering an excellent range of engine monitoring and protection features.

The module has been designed to monitor low oil pressure, high engine temperature, over speed and a user defined auxiliary input.

It also has the capability to monitor battery charging by utilizing the WL terminal on the charge alternator. When the module detects a fault condition it automatically shuts down the engine.

The 701 modules include a remote start signal input. This input allows the module to be started from a pre-defined remote location.

 

FEATURES :

Manual start

Engine pre-heat

Engine monitoring and protection features

Protected solid state (PSS) outputs

Front panel mounting

Tamper proof engine hours counter

Remote start

LED indicators

 

BENEFITS

Hours counter provides accurate information for monitoring maintenance and warranty periods;

Multiple engine parameters are monitored simultaneously 

MANUAL MODE

The module is started using the on-board key/buttons

The user turns the key to the position

The engine pre-heat button is then pressed for the required time

The start button is then pressed to start the engine

To stop the engine the key needs

 

AUTOMATIC MODE

The key needs to be permanently left in the position

The module is powered up by the remote start signal

The pre-heat function is automatically carried out and then the engine is started

To stop the engine the remote switch is turned to the off position

 

OVERSPEED PROTECTION


The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal operation (57Hz or 68Hz trip respectively).

During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeed is enabled) to allow the engine to reach its optimum running speed.

Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Request a Quote
Produk Siap di Pesan
Rp 0
1